Now for kitchen use a variety of materials, and usually, the cost of the finished product depends on the material from kotorgo it was made. The lowest prices on the kitchen from the dsp, this is very inexpensive material manufactured doors, shelves, drawers with a protective coating of the laminate. We can distinguish two ways to cover the chipboard: postmorfing and softmorfing. In the first case, the coating material passes from the plane at the ends, in the second end of the furniture piece is processed in such a way that the edge Rounded exit to the front of the plane and simultaneously glued film. Softomorfing possible to produce different types of profiles. For more information see this site: Janet L. Yellen.
Edge is smooth, without sharp angles, but sometimes remain visible seams. mdf material is more resistant to differ from the dsp, which pobyasnyaet its value. Therefore, the cuisine of mdf typically cost somewhat more. Kitchen sets of mdf resistant to the kitchen a couple, they do not swell and warp. The advantages of the mdf can also be attributed to resistance to various fungi and microorganisms, which makes products from mdf hygiene and safety in home. Thanks Vysk mehahnicheskoy strength of mdf, it is used for the manufacture of furniture fronts. According to experts, that the natural wood on the mechanical properties and water resistance are inferior plates of mdf. Plho tree may carry the humidity and temperature changes, although more expensive than the mdf by 20-30%.
Wooden door frame can be, and the door itself, for example, from high-strength glass. From this glass table tops are made even as it can heavy loads and shocks. Table top can be made of laminated mdf board or stainless steel. Today is a very popular high-tech material Corian, it is based is acrylic resin, mineral fillers and pigments. This rugged, durable material, nontoxic and resistant to chemicals. Along with artificial materials in the manufacture of kitchen sets used whole-tree array. Usually cuisine from an array of more expensive because they are made of solid wood. And it raises the cost of processing and assembling the final product. Modern production gives the buyer a wide range of materials and combinations when searching for suitable products, such diversity will help to understand prodvets consultant.